基于跨语言词向量模型的蒙汉查询词扩展方法研究

跨语言信息检索指以一种语言为检索词,检索出用另一种或几种语言描述的一种信息的检索技术,是信息检索领域重要的研究方向之一。近年来,跨语言词向量为跨语言信息检索提供了良好的词向量表示,受到很多学者的关注。该文首先利用跨语言词向量模型实现汉文查询词到蒙古文查询词的映射,其次提出串联式查询扩展、串联式查询扩展过滤、交叉验证筛选过滤三种查询扩展方法对候选蒙古文查询词进行筛选和排序,最后选取上下文相关的蒙古文查询词。实验结果表明: 在蒙汉跨语言信息检索任务中引入交叉验证筛选方法对信息检索结果有很大的提升。     

Investigation of non-isothermal crystallization,dynamic mechanical and dielectric properties of poly(ether-ketone) matrix composites

ABSTRACT

Poly(ether-ketone)/hexagonal boron nitride (h-BN) composites reinforced with micrometer-sized h-BN particles were investigated. The composites exhibited glass transition temperature (T_g) and thermal stability over 160°C and 560°C, respectively. The melting point and peak crystallization temperatures of the composites decreased up to 17°C and 12°C, respectively. The linear CTE of the composites decreased both below and above the T_g. The storage modulus increased with increasing h-BN content at all temperatures (50–250°C). The composites possessed excellent dielectric properties with insignificant dispersion with increasing frequency. Thus, resultant composites are promising candidates for the printed circuit boards/electronic substrates.     

Prelabeling Expansion Single-Molecule Localization Microscopy with Minimal Linkage Error

Expansion microscopy combined with single-molecule localization microscopy (ExSMLM) has a potential for approaching molecular resolution. However, ExSMLM faces multiple challenges such as loss of fluorophores and proteins during polymerization, digestion or denaturation, and an increase in linkage error arising from the distance between the fluorophore and the target molecule. Here, we introduce a trifunctional streptavidin to link the target, fluorophore and gel matrix via a biotinylizable peptide tag. The resultant ExSMLM images of vimentin filaments demonstrated high labeling efficiency and a minimal linkage error of ∼5 nm. Our ExSMLM provides a simple and practical means for fluorescence imaging with molecular resolution.     

一种酰胺类沥青乳化剂的制备及性能研究

首先通过脂肪酸与酸酐反应，得到多元羧酸中间体，再将其与改性多乙烯多胺经过一系列反应合成一种酰胺类沥青乳化剂，采用傅里叶红外光谱对乳化剂结构进行表征。实验室对比测试了自制乳化剂与进口乳化剂的表面活性及其所制乳化沥青的性能。结果表明：两种乳化剂制备乳化沥青的各项性能指标均可满足微表处施工技术要求，且自制乳化剂具有较高的固含量和较好的储存稳定性，乳化沥青8 min即可破乳，用于微表处养护可快速开放交通；自制乳化剂价格仅为进口乳化剂的76.4%左右，应用前景良好。     

Influence of temperature cycling and pore fluid on tensile strength of chalk

Calcite has a highly anisotropic thermal expansion coefficient, and repeated heating and cooling cycles can potentially destabilize chalks by breaking cement bonds between neighboring particles. Based on tensile strength measurements, we investigated how temperature cycles induce weakening of chalk. Tensile strength tests were performed on chalk specimens sampled from Kansas (USA) and Mons (Belgium), each with differing amounts of contact cement. Samples of the two chalk types were tested in dry and water-saturated states, and then exposed to 0, 15, and 30 temperature cycles in order to find out under what circumstances thermally induced tensile strength reduction occurs. The testing results show that the dry samples were not influenced by temperature cycling in either of the chalk types. However, in the water-saturated state, tensile strength is increasingly reduced with progressive numbers of temperature cycles for both chalk samples, especially for the more cemented Kansas chalk. The Kansas chalk demonstrated higher initial tensile strength compared to the less cemented Mons chalk, but the strength of both chalks was reduced by the same relative proportion when undergoing thermal cycles in the water-saturated state.     

综合传动装置胀圈密封轴槽间隙设计方法

研究一种基于理论计算与CFD仿真的胀圈密封环轴槽间隙尺寸设计方法。基于流体力学的基本方程,建立胀圈密封流场的数学模型;结合实际工况与使用要求,确定胀圈密封环与轴槽径向间隙、轴向间隙及配流衬套与旋转轴之间的间隙尺寸的约束范围;建立流场的计算流体力学模型,通过正交试验设计,分析影响胀圈密封性能的高灵敏度因素;以密封泄漏量最小为目标函数,选取最佳的轴槽间隙设计参数。结果表明,研究的3种间隙中,相比于胀圈密封环与轴槽的径向间隙、轴向间隙,配流衬套与旋转轴之间的间隙对密封环的泄漏量影响更为显著,当配流衬套与旋转轴之间的间隙增大,泄漏量也随之增大。     

膨胀剂对约束条件下UHPC早期抗裂性能影响的试验研究

超高性能混凝土(UHPC)在钢桥面铺装结构中由于铺装材料受到钢板、栓钉等的约束,加上材料本身水胶比小,更易收缩,早期容易承受拉应力导致开裂。通过在拌和过程中添加膨胀剂可以起到减小收缩的作用,但该方法对于约束条件下的UHPC铺装的早期抗裂性能提升是否有促进作用,仍需通过更多试验进行合理评估和深入研究。通过圆环法对3组不同配方的UHPC在均匀约束条件下的早期抗裂性能进行定量测试,并将试验数据进行回归分析和计算,得到了各组的平均应力发展速率,进而评估了各组的开裂风险等级。试验结果表明,通过在UHPC中加入适量膨胀剂,可使其最终收缩应力减小,并可降低其收缩应力发展速率,进一步降低其在约束条件下的开裂风险。     

Comfort design and optimization of direct expansion multi-connected radiant air conditioning based on 3D flow field simulation

The air conditioning method based on radiation heat exchange has the characteristics of small vertical temperature gradient, high thermal comfort and energy saving, and has become a hot spot of attention. The Fluent numerical simulation, the experiment in this paper studies the direct expansion multi-line radiant air conditioner under the artificially simulated climate environment in winter heating, summer cooling and dehumidification. The temperature difference of the radiation + fresh air mode at the same time indoors under heating conditions is less than 2.5 °C, and the time to reach the indoor set temperature of 24 °C is about 2–3 h. Under cooling conditions, the temperature difference of the radiation + fresh air mode at the same time in the room is about 0.5–2 °C, and the time to reach the indoor set temperature of 26 °C is about 1–3 h. In the fresh air mode, the indoor temperature difference and response time at the same time are slightly larger than the radiation + fresh air mode. The freezing and dehumidification effect of fresh air is obvious, the moisture content of dehumidifying fresh air is between 6.3 and 10.5 g/kg, and the dehumidification efficiency can reach 50%. Under the same artificial simulated climate environment, the consumption of the three modes is not much different. When the outdoor temperature in heating conditions is higher than 9 °C, the fresh air mode can get better, and the radiation + fresh air mode can achieve better comfort when running indoors under various conditions.     

Crystal structure and functional properties of Nd1.6Ca0.4Ni1-yCuyO4+δ as prospective cathode materials for intermediate temperature solid oxide fuel cells

Complex oxides Nd_1.6Ca_0.4Ni_1-yCu_yO_4+δ (y = 0.0–0.4) have been prepared by a pyrolysis of glycerol-nitrate compositions. According to the X-ray diffraction analysis, the materials are single-phase up to y = 0.3 and crystallize in an orthorhombic structure (Bmab) at room temperature. High-temperature studies assert that they all undergo a phase transition from orthorhombic to tetragonal (I4/mmm) structure in a range of 300–400 °C. With Cu doping, the over-stoichiometric oxygen content δ decreases from 0.07 (y = 0.0) down to 0.00 (y = 0.3). The studies on the compact samples reveal the maximum value of total conductivity (165 S cm^?1 at 420 °C) and the minimum value of the linear coefficient of thermal expansion (11.9·10^?6 K^?1 in a range of 400–1000 °C in air) at y = 0.2. Chemical compatibility of the Nd_1.6Cа_0.4Ni_1-yCu_yO_4+δ (y = 0.0, 0.2) oxides with oxygen- and proton conducting electrolytes (Ce_0.9Gd_0.1O_1.95, Ce_0.8Sm_0.2O_1.9 and BaCe_0.5Zr_0.3Y_0.1Yb_0.1O_3-δ) up to a temperature of 1100 °C is demonstrated.